Automatic Syringe Filler for Oral Liquid

AAutomatic syringe filler for oral liquid widely use




Automatic syringe filler for oral liquid function
With the dial wheel intermittently rotating, the syringe barrel is fed by a piece of the organizer and hung on the dial.
In the filling station: filling by the gel filling pump, the filling nozzle is sealed from the bottom to the upper part of the syringe and the pressure is filled. The piston movement of the filling pump is driven by the servo motor, the filling amount and the filling The loading speed can be set and adjusted on the touch screen.
In the capping station: the hat is conveyed by the shock plate to the lower side of the small nozzle of the syringe, and then the cap is driven upward by the cylinder. If it is a screw cap, the cap is first sucked by a cap and then sent to the cap. Inside the head, the cap is raised again, rotating while rising, and the cap is screwed onto the syringe head.
Discharge: The dial wheel rotates to the discharge station, and the syringe is pulled down from the dial by the discharge lever, and then the slide is slid down to collect (single slide down).
Automatic syringe filler for oral liquid main technical parameterAutomatic syringe filler for oral liquid Feature:

• Fully-automatic
• 100% In-Process-Control (100% IPC)
• Aseptic fields of application
• Gently objective handling
• Disposable product path optional
• Dosing system: Mass flow with CIP/ SIP optional
• Dosing system: Rotary piston system, peristaltic pump system, time/pressure dosing system with or without CIP / SIP optional
• Simple operation
• Flexible adjustable filling movement
• Intermittent operation
• Appropriate for oRABS, cRABS and Isolator
• Easy and fast format change
• Very good ability to be cleaned
• Very good accessibility
• Transport system: Transport grippers
• Small amount of format parts
• Processability from watery to highly viscous products, from non-toxic to toxic products
• Pre-, fill- and post-gas flushing optional

Automatic syringe filler for oral liquid details parts introduce
1.Filling by Ceramic turn valve pump or peristaltic pump control. The filling nozzle is sealed from the bottom to the top of the syringe and use pressure filling for high viscosity material like toothpaste , The piston movement of the filling pump is driven by the servo motor, and the filling amount and filling speed can be set and adjusted on the touch screen

2. The cover is sorted by the cap vibrating and sent to the insert capping station syringe, and then the capper is forwarded, and the vacuum capper to vacuum suction the cap and then moved up. Move back and forth, put the cap into the bottom of syringe

3. In the capping station: the hat is conveyed by the shock plate to the lower side of the small nozzle of the syringe, and then the cap is driven upward by the cylinder. If it is a screw cap, the cap is first sucked by a cap and then sent to the cap. Inside the head, the cap is raised again, rotating while rising, and the cap is screwed onto the syringe head.

Company profile
Machine packing and shipping

After-sale serivce
1. Installation, debug
After equipment reached the workshop of customer, place the equipment according to plane layout we offered. We will arrange seasoned technician for equipment installation, debug and test production at the same time make the equipment reach the rated producing capacity of the line. The buyer need to supply the round tickets and accommodation of our engineer, and the salary.

2. Training
Our company offer technology training to customer. The content of training is structure and maintenance of equipment, control and operation of equipment. Seasoned technician will guide and establish training outline. After training, the technician of buyer could master the operation and maintenance, could adjust the process and treat different failures. 

3. Quality guarantee
We promise that our goods are all new and not used. They're made of suitable material, adopt new design. The quality, specification and function all meet the demand of contract. 
4. After sales
After checking, we offer 12 months as quality guarantee, free offer wearing parts and offer other parts at the lowest price. In quality guarantee, the technician of buyers should operate and maintain the equipment according to seller's demand, debug some failures. If you could not solve the problems, we will guide you by phone; if the problems are still can not solve, we will arrange technician to your factory solving the problems. The cost of technician arrangement you could see the cost treatment method of technician. 

After quality guarantee, we offer technology support and after sales service. Offer wearing parts and other spare parts at favorable price; after quality guarantee, the technician of buyers should operate and maintain the equipment according to seller's demand, debug some failures. If you could not solve the problems, we will guide you by phone; if the problems are still can not solve, we will arrange technician to your factory solving the problems.

FAQ

Q:How Can I get a detailed quotation of Automatic syringe filler for oral liquid from you?
Just send us inquiry through this web page is ok. I will reply your any question within in 6 hours.

Q:Can your company able to offer 2 years gurantee?
Yes it's no problem for our company. During the warranty, if you need any spare parts, we will delivery it to you in DHL for free. 

Q:Do you offer a free set of replacement parts for parts that commonly wear out quickly?
All spare parts are always avaliable for delivery. Above 90% spare parts are made by ourselves. Because we have our own processing center, so we can supply at anytime.

Q:What is the whole production line?Can i connect labeling machine ,bottle feeder with filling machine in whole line? 
I do not know how many meters of conveyors are involved so can not determine the over-all size of the line with all of its components.
We can help you match pipe and pump to transfer material form raw material tank to filling directly., so it can be totally auatomaticlly.We will design and make a layout plan according to customer's factory floor plan.

Q:What is the cost to send installation/training staff? How many staff do you need to send?
Whole installation/traning process needs 2peoples. Around 10days. Client needs to provide us round-air ticket, visa fee, local transpotation, accomodation, food, and 80USD/day/person.